Mechanical Belt Thickener

1 Piece (MOQ)

Business Type	Supplier, Trader
Capacity by dry matter, up to more [kg/h]	600…1100 kg/h
Capacity by initial sludge, up to more [m3/h]	30…50 m3/h
Belt width, [mm]	1200…2000 mm
Click to view more

Preferred Buyer From

Location

Anywhere in India

Product Details

Belt velocity, [m/min]

2…10 m/min

Drive power, [kW]

1,1 kW

Weight

1270…1810 kg

Brand

Euroteck

Operating Principle

The thickener operates in continuous mode.

The sludge / flocculent mixture is fed to the moving top sieve belt and distributed all over its operating length. In the movement, the sludge layer is constantly mixed by the ripper system for water outflow improvement. The water drains via gravity feed. The dewatered filter cake is then removed from the belt by polymeric scrapers into the receiving bin. The thickener is flushed by water under pressure in the flushing zone after the filter cake removal.
After dewatering in the thickener, the sludge moisture can be reduced from 98-99% to 90-96% – i.e. decrease of sludge volume of 3-10 times occurs.

Advantages

High efficiency of sludge thickening due to special system of rippers
High corrosion prevention – the case of is manufactured from stainless steel AISI 304 and the load bearing shafts of carbon structural steel that is protected by polymeric covering
Automated control system of the belt and its protection against displacement

Automation

The filter presses are provided with drives, belt position-, speed- and tension control system sensors and an air pressure loss protection system. It allows complete automation of the dewatering units on the basis of filter presses to implement.
All electric sensors and drives have a high level of protection against moisture and ambient air corrosive action.
An indication system of normal operation and emergency situations is provided.
It is possible to transfer equipment status data to a higher level automated process control system depending on the client’s requirements.

Package