Mechanical Belt Filter Press Unit

Belt filter press 

• It is intended for mechanical dewatering of wastewater sludge, water conditioning sludge, and industrial slimes. 
• It features a rollers system installed on the frame, between which two endless belts are stretched and connected into continuous ducts.
• Two belt flushing assemblies, sludge feeder and distributor, and filter cake removal devices are provided with the filter press.
• Belt thickener 
• It is intended for mechanical dewatering, conditioning, and purifying wastewater sludge and industrial slime. 
• It features a strained, endless sieve belt with an installed ripper system.
• After dewatering in belt thickener, the sludge moisture can be reduced from 98-99% to 90-96%
• It is optimal for wastewater with pH 6.0 – 9.0.
• Belt filter press combi units
• In this system, the belt thickener is installed onto the frame of the belt filter press. 
• It features the belt filter press PL series and belt thickener SG mounted on it.
• The dewatered sludge in the belt filter press is treated with a polymer; however, in belt filter press combi units, after polymer treatment, sludge is fed into the top of the unit, on belt thickener.
• Here, preliminary sludge dewatering is done under gravity.
• Finally, the sludge is supplied to filter press gravity dewatering zone.
• The dewatering capacity can be increased with the belt filter press combi units.

Advantages

• Compact equipment.
• Best suitable for sludge with initial moisture of more than 97.5%.
• It lengthens the gravity dewatering zone.
• Low polymer consumption.
• High corrosion resistance.
• Cost-efficient.
• It is reliable because of the high-quality components in the equipment.
• High efficiency of sludge thickening due to a special system of rippers.
• Automated control system
• Certified spare parts and accessories